Ιδρυματικό Αποθετήριο
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

Gear skiving – CAD simulation approach

Antoniadis Aristomenis

Πλήρης Εγγραφή


URI: http://purl.tuc.gr/dl/dias/340FFF4A-549C-49DA-ACD3-3C966000F6D1
Έτος 2012
Τύπος Δημοσίευση σε Περιοδικό με Κριτές
Άδεια Χρήσης
Λεπτομέρειες
Βιβλιογραφική Αναφορά A. Antoniadis, "Gear skiving-CAD simulation approach", Comput. Aided Design, vol. 44, no. 7, pp. 611-616, Jul. 2012. doi:10.1016/j.cad.2012.02.003 https://doi.org/10.1016/j.cad.2012.02.003
Εμφανίζεται στις Συλλογές

Περίληψη

Gear skiving is used as a gear finishing process to reduce distortion errors which occurred on the gears due to the heat treatment. This process is similar to gear hobbing but the difference is that the cutting tool has a negative rake angle and tooth rake offset. The present study simulates the kinematics of the cutting process with the aid of commercial CAD software and allows the precise determination of the non-deformed chips and the developing cutting forces. The simulation model is verified based on the theoretical shape of the produced gear gap and the comparison between measured and calculated cutting forces.

Υπηρεσίες

Στατιστικά