Cadmium removal from aqueous solutions using nano-iron doped ligniteCadmium removal from aqueous solutions using nano-iron doped lignite
Πλήρης Δημοσίευση σε Συνέδριο
Conference Full Paper
2020-07-132018enIn the present study the removal of Cadmium (Cd) from spiked aqueous solutions using low quality lignite (LG) was studied. A comparison between the adsorption capacity of activated carbon (AC) and lignite is presented, while the enhancement of the adsorption capacity, by adding Nano-scale zero valent iron (nZVI) onto AC and LG was investigated. To study the enhancement of adsorption capacity, two materials were synthesized (LGFe, ACFe). The sorbents were characterized by Scanning Electron Microscopy (SEM-EDX), while their sorption efficiency, for Cd removal, was investigated with kinetic and equilibrium studies performed in batch conditions. With the proposed procedure nZVI was successfully "loaded" onto lignite and Cd removal from solutions reached 90%. The addition of iron nanoparticles in organic materials significantly increased adsorptive capacity, which was more drastic in the case of lignite. The experiments showed that sorption equilibrium was achieved within 12 h for all materials and that maximum adsorption capacity of LG, AC, LGFe, and ACFe was 25.5mg/g, 30mg/g, 34.7mg/g, and 36.5mg/g, respectively. The results of the equilibrium experiments proved to fit better to the Freundlich equation.http://creativecommons.org/licenses/by/4.0/3rd World Multidisciplinary Earth Sciences SymposiumIOP Conference Series: Earth and Environmental SciencePentari_et_al_IOP Conf. Ser.: Earth Environ. Sci._221_2019.pdfChania [Greece]Library of TUC2020-07-13application/pdf354.5 kBfree
Pentari Despoina
Πενταρη Δεσποινα
Vamvouka Despoina
Βαμβουκα Δεσποινα
IOP Publishing
Activated carbon
Cadmium
Chemicals removal (water treatment)
Lignite
Scanning electron microscopy