Institutional Repository
Technical University of Crete
Technical University of Crete
EN
|
EL
| URI: | http://purl.tuc.gr/dl/dias/F2563B1B-8563-45E2-B88C-B7CF04C5A232 | ||
| Year | 2001 | ||
| Type of Item | Peer-Reviewed Journal Publication | ||
| License |
|
||
| Bibliographic Citation | K.-D. Bouzakis, S. Kombogiannis, A. Antoniadis and N. Vidakis, "Gear hobbing cutting process simulation and tool wear prediction models", J. Manuf. Sci. Eng., vol. 124, no. 1, pp. 42-51, Mar. 2001. doi:10.1115/1.1430236 https://doi.org/10.1115/1.1430236 | ||
| Appears in Collections |
Gear hobbing is an efficient method to manufacture high quality and performance toothed wheels, although it is associated with complicated process kinematics, chip formation and tool wear mechanisms. The variant cutting contribution of each hob tooth to the gear gaps formation might lead to an uneven wear distribution on the successive cutting teeth and to an overall poor tool utilization. To study quantitatively the tool wear progress in gear hobbing, experimental-analytical methods have been established. Gear hobbing experiments and sophisticated numerical models are used to simulate the cutting process and to correlate the undeformed chip geometry and other process parameters to the expected tool wear. Herewith the wear development on the individual hob teeth can be predicted and the cutting process optimized, among others, through appropriate tool tangential shifts, in order to obtain a uniform wear distribution on the hob teeth. To determine the constants of the equations used in the tool wear calculations, fly hobbing experiments were conducted. Hereby, it was necessary to modify the fly hobbing kinematics,applying instead of a continuous tangential feed, a continuous axial one. The experimental data with uncoated and coated high speed steel (HSS) tools were evaluated, and correlated to analytical ones, elaborated with the aid of the numerical simulation of gear hobbing. By means of the procedures described in this paper, tool wear prediction as well as the optimization of various magnitudes, as the hob tangential shift parameters can be carried out.
Copyright © DIAS 2013
