Ιδρυματικό Αποθετήριο
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

Effect of impact angle and velocity in crater circularity in abrasive water jet machining by means of multi-particle impact simulation

Maniadaki Kyriaki, Antoniadis Aristomenis, Bilalis Nikolaos

Απλή Εγγραφή


URIhttp://purl.tuc.gr/dl/dias/23AEAFD2-B5B3-4BFB-B685-92F1293BCEC1-
Αναγνωριστικόhttp://www.inderscienceonline.com/doi/abs/10.1504/IJMMM.2011.040853-
Αναγνωριστικόhttps://doi.org/10.1504/IJMMM.2011.040853-
Γλώσσαen-
Μέγεθος14 pagesel
ΤίτλοςEffect of impact angle and velocity in crater circularity in abrasive water jet machining by means of multi-particle impact simulationen
ΔημιουργόςManiadaki Kyriakien
ΔημιουργόςAntoniadis Aristomenisen
ΔημιουργόςΑντωνιαδης Αριστομενηςel
ΔημιουργόςBilalis Nikolaosen
ΔημιουργόςΜπιλαλης Νικολαοςel
ΕκδότηςInderscienceen
ΠερίληψηThe present study focuses on the erosion mechanism observed during abrasive water jet (AWJ) machining. An ANSYS/LS-Dyna 3D software-based finite element (FE) model is developed for the representation of the erosion process in a 3D configuration. The proposed FE model’s solution, which accounts for the effect of multiple particle impacts on a workpiece made of stainless steel (AISI 304), is obtained using a 16-node cluster system. The influence of impact angle and particle velocity is currently studied, while the material’s crater circularity is also evaluated. The results of the present study are found to be in very good agreement with their experimental counterparts.en
ΤύποςPeer-Reviewed Journal Publicationen
ΤύποςΔημοσίευση σε Περιοδικό με Κριτέςel
Άδεια Χρήσηςhttp://creativecommons.org/licenses/by/4.0/en
Ημερομηνία2015-10-23-
Ημερομηνία Δημοσίευσης2011-
Θεματική ΚατηγορίαAWJ cuttingen
Θεματική ΚατηγορίαAbrasiveen
Θεματική ΚατηγορίαCrateren
Θεματική ΚατηγορίαCircularityen
Βιβλιογραφική ΑναφοράK. Maniadaki, A. Antoniadis and N. Bilalis, "Effect of impact angle and velocity in crater circularity in abrasive water jet machining by means of multi-particle impact simulation", Int. J. of Machining and Machinability of Materials, vol. 10, no. 1-2, pp. 34-47, 2001. doi:10.1504/IJMMM.2011.040853en

Υπηρεσίες

Στατιστικά