Institutional Repository
Technical University of Crete
Technical University of Crete
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/150CDE80-06DD-42F4-BE63-99A1236E761B | - |
| Identifier | http://www.sciencedirect.com/science/article/pii/S0263224112001467 | - |
| Identifier | https://doi.org/10.1016/j.measurement.2012.03.026 | - |
| Language | en | - |
| Extent | 10 pages | en |
| Title | 3-Dimensional kinematics simulation of face milling | en |
| Creator | Tapoglou Nikolaos | en |
| Creator | Ταπογλου Νικολαος | el |
| Creator | Antoniadis Aristomenis | en |
| Creator | Αντωνιαδης Αριστομενης | el |
| Publisher | Elsevier | en |
| Content Summary | Face milling is currently the most effective and productive manufacturing method for roughing and finishing large surfaces of metallic parts. Milling data, such as surface topomorphy, surface roughness, non-deformed chip dimensions, cutting force components and dynamic cutting behavior, are very helpful, especially if they can be accurately produced by means of a simulation program. This paper presents a novel simulation model which has been developed and embedded in a commercial CAD environment. The model simulates the true tool kinematics using the exact geometry of the cutting tool thus accurately forecasting the resulting roughness. The accuracy of the simulation model has been thoroughly verified, with the aid of a wide variety of cutting experiments. The proposed model has proved to be suitable for determining optimal cutting conditions for face milling. The software can be easily integrated into various CAD–CAM systems. | en |
| Type of Item | Peer-Reviewed Journal Publication | en |
| Type of Item | Δημοσίευση σε Περιοδικό με Κριτές | el |
| License | http://creativecommons.org/licenses/by/4.0/ | en |
| Date of Item | 2015-10-24 | - |
| Date of Publication | 2012 | - |
| Subject | Face milling | en |
| Subject | Cutting forces | en |
| Subject | CAD based simulation | en |
| Bibliographic Citation | N. Tapoglou and A. Antoniadis, "3-Dimensional kinematics simulation of face milling", Measurement, vol. 45, no. 6, pp. 1396-1405, Jul. 2012. doi:10.1016/j.measurement.2012.03.026 | en |
Copyright © DIAS 2013
