Ιδρυματικό Αποθετήριο
Πολυτεχνείο Κρήτης
Πολυτεχνείο Κρήτης
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/150CDE80-06DD-42F4-BE63-99A1236E761B | - |
| Αναγνωριστικό | http://www.sciencedirect.com/science/article/pii/S0263224112001467 | - |
| Αναγνωριστικό | https://doi.org/10.1016/j.measurement.2012.03.026 | - |
| Γλώσσα | en | - |
| Μέγεθος | 10 pages | en |
| Τίτλος | 3-Dimensional kinematics simulation of face milling | en |
| Δημιουργός | Tapoglou Nikolaos | en |
| Δημιουργός | Ταπογλου Νικολαος | el |
| Δημιουργός | Antoniadis Aristomenis | en |
| Δημιουργός | Αντωνιαδης Αριστομενης | el |
| Εκδότης | Elsevier | en |
| Περίληψη | Face milling is currently the most effective and productive manufacturing method for roughing and finishing large surfaces of metallic parts. Milling data, such as surface topomorphy, surface roughness, non-deformed chip dimensions, cutting force components and dynamic cutting behavior, are very helpful, especially if they can be accurately produced by means of a simulation program. This paper presents a novel simulation model which has been developed and embedded in a commercial CAD environment. The model simulates the true tool kinematics using the exact geometry of the cutting tool thus accurately forecasting the resulting roughness. The accuracy of the simulation model has been thoroughly verified, with the aid of a wide variety of cutting experiments. The proposed model has proved to be suitable for determining optimal cutting conditions for face milling. The software can be easily integrated into various CAD–CAM systems. | en |
| Τύπος | Peer-Reviewed Journal Publication | en |
| Τύπος | Δημοσίευση σε Περιοδικό με Κριτές | el |
| Άδεια Χρήσης | http://creativecommons.org/licenses/by/4.0/ | en |
| Ημερομηνία | 2015-10-24 | - |
| Ημερομηνία Δημοσίευσης | 2012 | - |
| Θεματική Κατηγορία | Face milling | en |
| Θεματική Κατηγορία | Cutting forces | en |
| Θεματική Κατηγορία | CAD based simulation | en |
| Βιβλιογραφική Αναφορά | N. Tapoglou and A. Antoniadis, "3-Dimensional kinematics simulation of face milling", Measurement, vol. 45, no. 6, pp. 1396-1405, Jul. 2012. doi:10.1016/j.measurement.2012.03.026 | en |
Copyright © DIAS 2013
