Ιδρυματικό Αποθετήριο
Πολυτεχνείο Κρήτης
Πολυτεχνείο Κρήτης
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/FAF6AA83-5FC7-4715-8F96-49E85299540B | - |
| Αναγνωριστικό | http://www.sciencedirect.com/science/article/pii/0016236196000294 | - |
| Αναγνωριστικό | https://doi.org/10.1016/0016-2361(96)00029-4 | - |
| Γλώσσα | en | - |
| Μέγεθος | 6 pages | en |
| Τίτλος | Combustion of pulverized coal with additives under conditions simulating blast furnace injection | en |
| Δημιουργός | Vamvouka Despoina | en |
| Δημιουργός | Βαμβουκα Δεσποινα | el |
| Δημιουργός | Schwanekamp, Guido | en |
| Δημιουργός | Gudenau, Heinrich Wilhelm | en |
| Εκδότης | Elsevier | en |
| Περίληψη | The combustion properties of pulverized coal with additives were studied under conditions simulating injection into the blast furnace (heating rate 105 K s−1, residence time <20 ms, final temperature 1500°C). Coal rank, particle size and injection rate were varied. The additives were residuals from scrap automobiles (shredded light fractions), in various proportions. The performance of the coals tested was very dependent on coal rank and injection rate. The degree of combustion was generally improved with larger particle sizes at oxygen/coal ratios greater than the stoichiometric value. An increase in the amount of additive resulted in a lower degree of burnout. By using shredded light fractions in proportions up to 30 wt% with Lohberg coal and up to 10 wt% with N.Pedio lignite, a high level of burnout and a high injection rate could be achieved. | en |
| Τύπος | Peer-Reviewed Journal Publication | en |
| Τύπος | Δημοσίευση σε Περιοδικό με Κριτές | el |
| Άδεια Χρήσης | http://creativecommons.org/licenses/by/4.0/ | en |
| Ημερομηνία | 2015-10-26 | - |
| Ημερομηνία Δημοσίευσης | 1996 | - |
| Θεματική Κατηγορία | Pulverized coal | en |
| Θεματική Κατηγορία | Automobile scrap | en |
| Θεματική Κατηγορία | Combustion properties | en |
| Βιβλιογραφική Αναφορά | D. Vamvuka, G. Schwanekamp and H. W. Gudenau, "Combustion of pulverized coal with additives under conditions simulating blast furnace injection", Fuel, vol. 75, no. 9, pp. 1145-1150, Jul. 1996. doi:10.1016/0016-2361(96)00029-4 | en |
Copyright © DIAS 2013
