Institutional Repository
Technical University of Crete
Technical University of Crete
EN
|
EL
| URI: | http://purl.tuc.gr/dl/dias/7A490FD3-E609-4435-BC08-F87DA999F058 | ||
| Year | 2008 | ||
| Type of Item | Peer-Reviewed Journal Publication | ||
| License |
|
||
| Bibliographic Citation | V.C. Kelessidis, " Investigations on the thixotropy of bentonite suspensions, "Energy Sources Part A, vol. 30, no. 18, pp. 1729-1746, 2008. doi: 10.1080/15567030701456261 https://doi.org/10.1080/15567030701456261 | ||
| Appears in Collections |
The thixotropic behavior of water bentonite suspensions has been investigated using Wyoming and Zenith bentonites at 5.0% and 6.42% concentrations with 0.0 M, 0.01 M, and 0.1 M NaCl following API preparation protocols. Rheological data was collected with a Couette viscometer, deriving first the D0 curve, from 600 to 3 rpm, followed by a typical thixotropic loop, getting the U curve from 3 to 600 rpm and then the D curve from 600 to 3 rpm. The Herschel-Bulkley model describes very well all experimental data. Yield stresses did not vary, but variations of flow consistency and of flow behavior indices were detected for the three curves. All suspensions with no salt and 0.01 M salt exhibited anti-thixotropy, estimated from the D0–U curves, while the 0.1-M suspensions showed no thixotropy. Thixotropy indices vary and depend on bentonite type and concentration and on the presence and amount of salt. The mechanisms of thixotropy and implications on drilling fluid performance are discussed.
Copyright © DIAS 2013
