Ιδρυματικό Αποθετήριο
Πολυτεχνείο Κρήτης
Πολυτεχνείο Κρήτης
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/AAC39097-74E7-4F70-B8BD-A70E23BA7268 | - |
| Γλώσσα | en | - |
| Τίτλος | Effect of laser drilling on mechanical properties of fir (abies borisii regis) and spruce (picea excelsa) wood | en |
| Δημιουργός | Adamopoulos Stergios | en |
| Δημιουργός | Passialis Constantinos | en |
| Δημιουργός | Voulgaridis Elias | en |
| Δημιουργός | Moustaizis Stavros | en |
| Δημιουργός | Kortsalioudakis Nathanail | en |
| Δημιουργός | Κορτσαλιουδακης Ναθαναηλ | el |
| Δημιουργός | Petrakis Panagiotis | en |
| Δημιουργός | Πετρακης Παναγιωτης | el |
| Δημιουργός | Karastergiou Sotirios | en |
| Δημιουργός | Foti Dafni | en |
| Δημιουργός | Koutsianitis Dimitrios | en |
| Δημιουργός | Voulgaridou Eleni | en |
| Περίληψη | Fir and spruce wood specimens, 20 × 20 mm in cross section and 340 mm long, were prepared with true radial and tangential surfaces. All lateral surfaces of the specimens were drilled by laser beams to a depth of 0.4 cm (1/5 of specimen thickness) with two drilling patterns (distance between holes 1 × 1 cm and 1 × 2 cm). After drilling, MOE and MOR in static bending, axial compression and toughness were determined and compared with non-drilled controls. MOE was not affected by the laser drilling but MOR was significantly increased. The increase in MOR was 12-13% for the drilled fir specimens as compared to controls and was significant only for the 1 × 2 cm pattern, while for spruce it was noted an even higher increase of 21-24% significant for both drilling patterns. Toughness strength of drilled fir and spruce specimens was lower than the non-drilled but the differences were not significant. Laser drilling had a positive significant impact in axial compression strength with an increase of 20-23% for fir and 19-27% for spruce, and no differences between the drilling patterns. The overall results imply that strength properties do not decline by the laser drilling and, thus, are encouraging for further evaluating the drilling effects on the liquid permeability of these refractory to impregnation species. | en |
| Τύπος | Δημοσίευση σε Συνέδριο | el |
| Τύπος | Conference Publication | en |
| Άδεια Χρήσης | http://creativecommons.org/licenses/by/4.0/ | en |
| Ημερομηνία | 2015-11-08 | - |
| Ημερομηνία Δημοσίευσης | 2014 | - |
| Θεματική Κατηγορία | Laser percussion drilling | en |
| Θεματική Κατηγορία | laser drilling | en |
| Θεματική Κατηγορία | laser percussion drilling | en |
| Βιβλιογραφική Αναφορά | S. Adamopoulos, C. Passialis, E. Voulgaridis, S. Moustaizis, N. Kortsalioudakis, P. Petrakis, S. Karastergiou, D. Foti, D. Koutsianitis and E. Voulgaridou, "Effect of laser drilling on mechanical properties of fir (Abies borisii regis) and spruce (Picea excelsa) wood", in The 5th RCCWS International Symposium, 2014. | en |
Copyright © DIAS 2013
