Ιδρυματικό Αποθετήριο
Πολυτεχνείο Κρήτης
Πολυτεχνείο Κρήτης
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/EB4BCEC8-EADD-4D42-A84E-FDF8ABF3F3C5 | - |
| Αναγνωριστικό | http://www.sciencedirect.com/science/article/pii/S0032386105002788 | - |
| Αναγνωριστικό | https://doi.org/10.1016/j.polymer.2005.02.091 | - |
| Γλώσσα | en | - |
| Μέγεθος | 11 pages | en |
| Τίτλος | Mechanical properties of short fiber reinforced thermoplastic blends | en |
| Δημιουργός | Malchev Plamen G. | en |
| Δημιουργός | David Ciprian T. | en |
| Δημιουργός | Picken Stephen J. | en |
| Δημιουργός | Gotsis Alexandros | en |
| Δημιουργός | Γκοτσης Αλεξανδρος | el |
| Εκδότης | Elsevier | en |
| Περίληψη | An immiscible thermoplastic component was added to a conventional short fiber reinforced polymer to study its effect on the mechanical properties of the composite. Because of the preferential wetting of the fiber reinforcement a continuous network was formed of fibers ‘welded’ together by the minor component within the matrix polymer. Polyethylene (PE) was used as the matrix, polyamide-6 (PA6) as dispersed polymer phase and glass fibers (GF) as reinforcement. The obtained composite retained unusually high values of the elasticity modulus at temperatures above the melting point of the matrix. The upper limit of the ‘applicability’ of the material is determined by the melting point of the minor component. A simple model was derived to describe the mechanical properties of the composite. The model shows a good agreement with the experimental data. The influence of the model parameters on the predictions of the model was examined. | en |
| Τύπος | Peer-Reviewed Journal Publication | en |
| Τύπος | Δημοσίευση σε Περιοδικό με Κριτές | el |
| Άδεια Χρήσης | http://creativecommons.org/licenses/by/4.0/ | en |
| Ημερομηνία | 2015-11-14 | - |
| Ημερομηνία Δημοσίευσης | 2005 | - |
| Θεματική Κατηγορία | Short fiber reinforced blend | en |
| Θεματική Κατηγορία | Preferential wetting | en |
| Θεματική Κατηγορία | Fiber network | en |
| Βιβλιογραφική Αναφορά | P. G. Malchev, C. T. David, S. J. Picken and A. D. Gotsis, "Mechanical properties of short fiber reinforced thermoplastic blends", Polymer, vol. 46, no. 11, pp. 3895-3905, May 2005. doi:10.1016/j.polymer.2005.02.091 | en |
Copyright © DIAS 2013
