Ιδρυματικό Αποθετήριο
Πολυτεχνείο Κρήτης
Πολυτεχνείο Κρήτης
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/9A64B225-6DBF-4FE3-ACD6-A614C9617E58 | - |
| Αναγνωριστικό | http://www.tandfonline.com/doi/full/10.1080/15567036.2011.588675 | - |
| Αναγνωριστικό | https://doi.org/10.1080/15567036.2011.588675 | - |
| Γλώσσα | en | - |
| Μέγεθος | 12 pages | en |
| Τίτλος | A multi-objective response surface analysis for the determination of the optimal cut-off quality and minimum thickness for selective mining of multiple-layered lignite deposits | en |
| Δημιουργός | Galetakis Michalis | en |
| Δημιουργός | Γαλετακης Μιχαλης | el |
| Δημιουργός | Roumpos, Christos 1978- | en |
| Εκδότης | Taylor & Francis | en |
| Περίληψη | For the estimation of grade and tonnage of the multiple-layer lignite deposits a sophisticated evaluation methodology, based on exploitation and quality parameters, is used. These parameters are usually determined empirically and the selected values are not always optimal. For the estimation of the optimal values, a new methodology based on response surface analysis is suggested. The minimum thicknesses for selective excavation of lignite and waste layers, as well as the maximum allowable ash of the mined lignite, were considered as the decisive control parameters, while the recovery of the lignite, the ash of the mined lignite, and the number of the exploitable lignite blocks were selected as the response variables. The developed methodology was applied in the South Field lignite mine in the area of Ptolemais. The estimated optimal values were compared to those currently applied and their impacts to deposit recovery, equipment utilization, and to the quality of the mined lignite were examined. | en |
| Τύπος | Peer-Reviewed Journal Publication | en |
| Τύπος | Δημοσίευση σε Περιοδικό με Κριτές | el |
| Άδεια Χρήσης | http://creativecommons.org/licenses/by/4.0/ | en |
| Ημερομηνία | 2015-11-15 | - |
| Ημερομηνία Δημοσίευσης | 2015 | - |
| Θεματική Κατηγορία | Selective mining | en |
| Θεματική Κατηγορία | Response surface | en |
| Θεματική Κατηγορία | Quality | en |
| Θεματική Κατηγορία | Optimization | en |
| Θεματική Κατηγορία | Lignite | en |
| Βιβλιογραφική Αναφορά | M. Galetakis and C. Roumpos, "A multi-objective response surface analysis for the determination of the optimal cut-off quality and minimum thickness for selective mining of multiple-layered lignite deposits", Energy Sourc. A, vol. 37, no. 4, pp. 428-439, Jan. 2015. doi:10.1080/15567036.2011.588675 | en |
Copyright © DIAS 2013
