Institutional Repository
Technical University of Crete
EN  |  EL

Search

Browse

My Space

Ultra high temperature gasification of municipal wastewater primary biosolids in a rotary kiln reactor for the production of synthesis gas

Gikas Petros

Simple record


URIhttp://purl.tuc.gr/dl/dias/C11FDB63-659D-4A69-9ACF-747B1C040524-
Identifierhttps://www.sciencedirect.com/science/article/pii/S0301479716300846?via%3Dihub-
Identifierhttps://doi.org/10.1016/j.jenvman.2016.02.043-
Languageen-
Extent6 pagesen
TitleUltra high temperature gasification of municipal wastewater primary biosolids in a rotary kiln reactor for the production of synthesis gasen
CreatorGikas Petrosen
CreatorΓκικας Πετροςel
PublisherElsevieren
Content SummaryPrimary Fine-Sieved Solids (PFSS) are produced from wastewater by the use of micro-sieves, in place of primary clarification. Biosolids is considered as a nuisance product, however, it contains significant amounts of energy, which can be utilized by biological (anaerobic digestion) or thermal (combustion or gasification) processes. In the present study, an semi-industrial scale UHT rotary kiln gasifier, operating with electric energy, was employed for the gasification of PFSS (at 17% moisture content), collected from a municipal wastewater treatment plant. Two gasification temperatures (950 and 1050 °C) had been tested, with minimal differences, with respect to syngas yield. The system appears to reach steady state after about 30–40 min from start up. The composition of the syngas at near steady state was measured approximately as 62.4% H2, 30.0% CO, 2.4% CH4 and 3.4% CO2, plus 1.8% unidentified gases. The potential for electric energy production from the syngas produced is theoretically greater than the electric energy required for gasification. Theoretically, approximately 3.8 MJ/kg PFSS of net electric energy may be produced. However, based on the measured electric energy consumption, and assuming that all the syngas produced is used for electric energy production, addition of excess electric energy (about 0.43 MJ/kg PFSS) is required to break even. The latter is probably due to heat losses to the environment, during the heating process. With the improvement of energy efficiency, the process can be self sustained, form the energy point of view.en
Type of ItemPeer-Reviewed Journal Publicationen
Type of ItemΔημοσίευση σε Περιοδικό με Κριτέςel
Licensehttp://creativecommons.org/licenses/by/4.0/en
Date of Item2018-03-08-
Date of Publication2017-
SubjectBiosolidsen
SubjectGasificationen
SubjectMunicipal sludgeen
SubjectPrimary fine-sieved solidsen
SubjectSyngasen
SubjectWaste to energyen
Bibliographic CitationP. Gikas, "Ultra high temperature gasification of municipal wastewater primary biosolids in a rotary kiln reactor for the production of synthesis gas," J. Environ. Manage., vol. 203, no.2, pp.688-694, Dec. 2017. doi:10.1016/j.jenvman.2016.02.043en

Services

Statistics