Ιδρυματικό Αποθετήριο
Πολυτεχνείο Κρήτης
Πολυτεχνείο Κρήτης
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/182584BB-3E26-4F0F-8094-C1488EDA2558 | - |
| Αναγνωριστικό | https://doi.org/10.26233/heallink.tuc.74191 | - |
| Γλώσσα | en | - |
| Μέγεθος | 60 pages | en |
| Τίτλος | Design of the full casing program in a deviated well | en |
| Δημιουργός | Aslanidis Panagiotis | en |
| Δημιουργός | Ασλανιδης Παναγιωτης | el |
| Συντελεστής [Επιβλέπων Καθηγητής] | Gaganis Vasileios | en |
| Συντελεστής [Επιβλέπων Καθηγητής] | Γαγανης Βασιλειος | el |
| Συντελεστής [Μέλος Εξεταστικής Επιτροπής] | Varotsis Nikolaos | en |
| Συντελεστής [Μέλος Εξεταστικής Επιτροπής] | Βαροτσης Νικολαος | el |
| Συντελεστής [Μέλος Εξεταστικής Επιτροπής] | Kalogerakis Nikos | en |
| Συντελεστής [Μέλος Εξεταστικής Επιτροπής] | Καλογερακης Νικος | el |
| Εκδότης | Πολυτεχνείο Κρήτης | el |
| Εκδότης | Technical University of Crete | en |
| Ακαδημαϊκή Μονάδα | Technical University of Crete::School of Mineral Resources Engineering | en |
| Ακαδημαϊκή Μονάδα | Πολυτεχνείο Κρήτης::Σχολή Μηχανικών Ορυκτών Πόρων | el |
| Περίληψη | Casing design constitutes of one of the major challenges in the oil industry. This is due to the fact that casing has to protect the well from the formation environment, which is going through and also from the variation of different conditions that occur in the subsurface. To initiate the design procedure, the construction of the pore and fracture pressure profile is required based on which, the number of the casing strings will be selected. Subsequently, the outside diameters (OD) of each casing string must be defined, as wells as the equivalent mud density (EMD), which will be used in each section. In addition, survey of the well is needed in order to convert the true vertical depth (TVD) to measured depth (MD). Finally, the calculations of the major forces that act on the well (burst, collapse and tension) are required, so that the final casing thickness and grade can be selected. The objective of this project is to provide a casing design on deviated, deep well (type slanted at target depth of 13000 ft) by taking into account the worst case scenario of all the above forces. | en |
| Τύπος | Μεταπτυχιακή Διατριβή | el |
| Τύπος | Master Thesis | en |
| Άδεια Χρήσης | http://creativecommons.org/licenses/by/4.0/ | en |
| Ημερομηνία | 2018-04-24 | - |
| Ημερομηνία Δημοσίευσης | 2018 | - |
| Θεματική Κατηγορία | Drilling engineering | en |
| Βιβλιογραφική Αναφορά | Panagiotis Aslanidis, "Design of the full casing program in a deviated well", Master Thesis, School of Mineral Resources Engineering, Technical University of Crete, Chania, Greece, 2018 | en |
Copyright © DIAS 2013
