Ιδρυματικό Αποθετήριο
Πολυτεχνείο Κρήτης
Πολυτεχνείο Κρήτης
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/81F4AFB5-7F69-47DD-8CC3-DBF2D1442EC7 | - |
| Αναγνωριστικό | https://doi.org/10.1088/1757-899X/564/1/012015 | - |
| Αναγνωριστικό | https://iopscience.iop.org/article/10.1088/1757-899X/564/1/012015 | - |
| Γλώσσα | en | - |
| Μέγεθος | 7 pages | en |
| Τίτλος | The in-plane compression performance of hierarchical honeycomb additive manufactured structures | en |
| Δημιουργός | Mansour Misel-Teontor | en |
| Δημιουργός | Μανσουρ Μισελ-Τεοντορ | el |
| Δημιουργός | Tsongas Konstantinos | en |
| Δημιουργός | Tzetzis Dimitrios | en |
| Δημιουργός | Antoniadis Aristomenis | en |
| Δημιουργός | Αντωνιαδης Αριστομενης | el |
| Εκδότης | IOP Publishing | en |
| Περίληψη | Fused Deposition Modelling (FDM) is a simple additive manufacturing (AM) technology utilising fine filament extrusion of mainly thermoplastic materials to build 3D objects layer by layer. The focus of this paper is firstly to design hierarchical honeycombs and secondly to fabricate such structures using FDM with polylactic acid (PLA). The manufactured hierarchical honeycombs were tested under compression. The compression performance of the hierarchical honeycombs was assessed also with finite element analysis and the results were compared with the experimental derived properties in order to elucidate the mechanical behaviour of such honeycomb AM structures. The results reveal that for the 2nd order hierarchy of honeycombs the stiffness and the strength are increased in comparison with the 0th and the 1st hierarchies. | en |
| Τύπος | Πλήρης Δημοσίευση σε Συνέδριο | el |
| Τύπος | Conference Full Paper | en |
| Άδεια Χρήσης | http://creativecommons.org/licenses/by/4.0/ | en |
| Ημερομηνία | 2020-04-09 | - |
| Ημερομηνία Δημοσίευσης | 2019 | - |
| Θεματική Κατηγορία | Derived properties | en |
| Θεματική Κατηγορία | Honeycomb structures | en |
| Θεματική Κατηγορία | Compression performance | en |
| Θεματική Κατηγορία | Fused deposition modelling | en |
| Βιβλιογραφική Αναφορά | M.T. Mansour, K. Tsongas, D. Tzetzis and A. Antoniadis, "The in-plane compression performance of hierarchical honeycomb additive manufactured structures" in 23rd Innovative Manufacturing Engineering and Energy International Conference, 2019. doi: 10.1088/1757-899X/564/1/012015 | en |
Copyright © DIAS 2013
