Ιδρυματικό Αποθετήριο
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

Processing of flexible plastic packaging waste into pyrolysis oil and multi-walled carbon nanotubes for electrocatalytic oxygen reduction

Veksha Andrei, Yin Ke, Moo James Guo Sheng, Oh Wen-Da, Ahamed Ashiq, Chen Wen Qian, Weerachanchai Piyarat, Giannis Apostolos, Lisak Grzegorz

Απλή Εγγραφή


URIhttp://purl.tuc.gr/dl/dias/E36969B7-E78F-4F08-8A3F-512356783EA0-
Αναγνωριστικόhttps://doi.org/10.1016/j.jhazmat.2019.121256-
Αναγνωριστικόhttps://www.sciencedirect.com/science/article/pii/S0304389419312105-
Γλώσσαen-
Μέγεθος9 pagesen
ΤίτλοςProcessing of flexible plastic packaging waste into pyrolysis oil and multi-walled carbon nanotubes for electrocatalytic oxygen reductionen
ΔημιουργόςVeksha Andreien
ΔημιουργόςYin Keen
ΔημιουργόςMoo James Guo Shengen
ΔημιουργόςOh Wen-Daen
ΔημιουργόςAhamed Ashiqen
ΔημιουργόςChen Wen Qianen
ΔημιουργόςWeerachanchai Piyaraten
ΔημιουργόςGiannis Apostolosen
ΔημιουργόςΓιαννης Αποστολοςel
ΔημιουργόςLisak Grzegorzen
ΕκδότηςElsevieren
ΠερίληψηFlexible plastic packaging waste causes serious environmental issues due to challenges in recycling. This study investigated the conversion of flexible plastic packaging waste with 11.8 and 27.5 wt.% polyethylene terephthalate (PET) (denoted as PET-12 and PET-28, respectively) into oil and multi-walled carbon nanotubes (MWCNTs). The mixtures were initially pyrolyzed and the produced volatiles were processed over 9.0 wt.% Fe2O3 supported on ZSM-5 (400 °C) to remove oxygenated hydrocarbons (catalytic cracking of terephthalic and benzoic acids) that deteriorate oil quality. The contents of oxygenated hydrocarbons were decreased in oil from 4.6 and 9.4 wt.% per mass of PET-12 and PET-28, respectively, to undetectable levels. After catalytic cracking, the oil samples had similar contents of gasoline, diesel and heavy oil/wax fractions. The non-condensable gas was converted into MWCNTs over 0.9 wt.% Ni supported on CaCO3 (700 °C). The type of plastic packaging influenced the yields (2.4 and 1.5 wt.% per mass of PET-12 and PET-28, respectively) and the properties of MWCNTs due to the differences in gas composition. Regarding the electrocatalytic application, both MWCNTs from PET-12 and PET-28 outperformed commercial MWCNTs and Pt-based electrodes during oxygen evolution reaction, suggesting that MWCNTs from flexible plastic packaging can potentially replace conventional electrode materials.en
ΤύποςPeer-Reviewed Journal Publicationen
ΤύποςΔημοσίευση σε Περιοδικό με Κριτέςel
Άδεια Χρήσηςhttp://creativecommons.org/licenses/by/4.0/en
Ημερομηνία2022-03-03-
Ημερομηνία Δημοσίευσης2020-
Θεματική ΚατηγορίαCatalytic oil upgradingen
Θεματική ΚατηγορίαChemical vapor depositionen
Θεματική ΚατηγορίαMulti-walled carbon nanotubesen
Θεματική ΚατηγορίαPlastic packaging wasteen
Θεματική ΚατηγορίαPyrolysisen
Βιβλιογραφική ΑναφοράA. Veksha, K. Yin, J. G. S. Moo, W.-D. Oh, A. Ahamed, W. Q. Chen, P. Weerachanchai, A. Giannis, and G. Lisak, “Processing of flexible plastic packaging waste into pyrolysis oil and multi-walled carbon nanotubes for electrocatalytic oxygen reduction,” J. Hazard. Mater., vol. 387, Apr. 2020, doi: 10.1016/j.jhazmat.2019.121256 en

Υπηρεσίες

Στατιστικά