Institutional Repository
Technical University of Crete
Technical University of Crete
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/E3BC821E-ED7D-483E-B687-682F4C088931 | - |
| Identifier | https://doi.org/10.3390/jcs5020062 | - |
| Identifier | https://www.mdpi.com/2504-477X/5/2/62 | - |
| Language | en | - |
| Extent | 15 pages | en |
| Title | 3D printed hierarchical honeycombs with carbon fiber and carbon nanotube reinforced acrylonitrile butadiene styrene | en |
| Creator | Mansour Misel-Teontor | en |
| Creator | Μανσουρ Μισελ-Τεοντορ | el |
| Creator | Tsongas Konstantinos | en |
| Creator | Tzetzis Dimitrios | en |
| Publisher | MDPI | en |
| Content Summary | The mechanical properties of Fused Filament Fabrication (FFF) 3D printed specimens of acrylonitrile butadiene styrene (ABS), ABS reinforced with carbon fibers (ABS/CFs) and ABS reinforced with carbon nanotubes (ABS/CNTs) are investigated in this paper using various experimental tests. In particular, the mechanical performance of the fabricated specimens was determined by conducting compression and cyclic compression testing, as well as nanoindentation tests. In addition, the design and the manufacturing of hierarchical honeycomb structures are presented using the materials under study. The 3D printed honeycomb structures were examined by uniaxial compressive tests to review the mechanical behavior of such cellular structures. The compressive performance of the hierarchical honeycomb structures was also evaluated with finite element analysis (FEA) in order to extract the stress-strain response of these structures. The results revealed that the 2nd order hierarchy displayed increased stiffness and strength as compared with the 0th and the 1st hierarchies. Furthermore, the addition of carbon fibers in the ABS matrix improved the stiffness, the strength and the hardness of the FFF printed specimens as well as the compression performance of the honeycomb structures. | en |
| Type of Item | Peer-Reviewed Journal Publication | en |
| Type of Item | Δημοσίευση σε Περιοδικό με Κριτές | el |
| License | http://creativecommons.org/licenses/by/4.0/ | en |
| Date of Item | 2023-05-04 | - |
| Date of Publication | 2021 | - |
| Subject | Additive manufacturing | en |
| Subject | 3D printing | en |
| Subject | Mechanical properties | en |
| Subject | Hierarchical honeycomb structures | en |
| Subject | Composite filaments | en |
| Subject | Carbon nanotubes | en |
| Subject | Carbon fibers | en |
| Subject | Finite Element Analysis (FEA) | en |
| Bibliographic Citation | M. T. Mansour, K. Tsongas, and D. Tzetzis, “3D printed hierarchical honeycombs with carbon fiber and carbon nanotube reinforced acrylonitrile butadiene styrene,” J. Compos. Sci., vol. 5, no. 2, Feb. 2021, doi: 10.3390/jcs5020062. | en |
Copyright © DIAS 2013
