Institutional Repository
Technical University of Crete
Technical University of Crete
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/6D78D4A3-923E-476E-AC07-55976BFFD696 | - |
| Identifier | https://doi.org/10.1007/s00170-022-10177-4 | - |
| Identifier | https://link.springer.com/article/10.1007/s00170-022-10177-4 | - |
| Language | en | - |
| Extent | 2 pages | en |
| Title | Correction to: Simulation of spiral bevel gear manufacturing by face hobbing and prediction of the cutting forces using a novel CAD‑based model | en |
| Creator | Efstathiou Charikleia | en |
| Creator | Ευσταθιου Χαρικλεια | el |
| Creator | Tapoglou Nikolaos | en |
| Publisher | Springer | en |
| Content Summary | 1 Correction to: The International Journal of Advanced Manufacturing Technology https://doi.org/10.1007/s00170-022-10065-x The original article contained a mistake. Figure 20 is presented twice. Thus, Fig. 22 has been mistakenly replaced by Fig. 20. The correct image is now shown below: The original article has been corrected. | en |
| Type of Item | Τυπογραφικό Λάθος | el |
| Type of Item | Erratum | en |
| License | http://creativecommons.org/licenses/by/4.0/ | en |
| Date of Item | 2024-04-11 | - |
| Date of Publication | 2022 | - |
| Bibliographic Citation | C. Efstathiou and N. Tapoglou, “Correction to: Simulation of spiral bevel gear manufacturing by face hobbing and prediction of the cutting forces using a novel CAD‑based model,” Int. J. Adv. Manuf. Technol., vol. 122, no. 9–10, pp. 3815–3816, Oct. 2022, doi: 10.1007/s00170-022-10177-4. | en |
Copyright © DIAS 2013
