Institutional Repository
Technical University of Crete
EN  |  EL

Search

Browse

My Space

Σύνθεση και μηχανική αντοχή δομικών στοιχείων με χρήση αδρανών υλικών από την Κύπρο

Xenofontos Andreas

Full record


URI: http://purl.tuc.gr/dl/dias/54940F00-3C02-489A-BC26-E6CBF5EB4F0F
Year 2024
Type of Item Diploma Work
License
Details
Bibliographic Citation Ανδρέας Ξενοφώντος, "Σύνθεση και μηχανική αντοχή δομικών στοιχείων με χρήση αδρανών υλικών από την Κύπρο", Διπλωματική Εργασία, Σχολή Μηχανικών Ορυκτών Πόρων, Πολυτεχνείο Κρήτης, Χανιά, Ελλάς, 2024 https://doi.org/10.26233/heallink.tuc.99894
Appears in Collections

Summary

The main objective of this dissertation is the design and evaluation of the mechanical strength of structural elements constructed using inert materials from Cyprus. The selection of suitable compositions of hydraulic binders for the reinforcement of masonry and historical structures made of stone masonry has become a common practice for the repair and strengthening of masonry, fractured, and disorganized architectural members or constructions made of old masonry, especially in seismic areas.Initially, two types of inert materials were evaluated in the laboratory according to European standards (EN & BS). These materials were sourced from two quarry units on the island where inert materials for the production of concrete and asphalt mixes are produced and distributed. Specifically, a diabase stone from Skyra Vassa Ltd and a limestone from CHAPO Ltd. Laboratory analyses of the inert materials included mineralogical and chemical analysis, grain size analysis, determination of the Los Angeles abrasion value (micro-Deval method), and determination of the resistance to impact (AIV method). The results of the analyses confirmed that these materials meet the relevant specifications for use as inert materials for concrete production and are indicative of the health of the origin rocks.Following the identification of the primary materials, a ternary composition of hydraulic setting material was designed based on a commercial natural hydraulic lime type NHL 5, a natural pozzolan, and white cement, in proportions of 80, 10, and 10% by weight, respectively. This mixture was used as filling material for the voids of cylindrical specimens, which contained a quantity of limestone and diabase inert materials of grain size distribution from 8 to 20 mm. These specimens simulated masonry consisting of limestone and diabase rocks, for the structural reinforcement of which compatibility with a hydraulic binder is required. The structural elements prepared in the laboratory were kept under specific temperature and humidity conditions within a climate chamber and were tested for their mechanical behavior by unconfined compressive strength testing at different curing times (28, 56, and 90 days, respectively). The experimental results from the mechanical strengths of the cylindrical specimens showed the ability of the composition of the binder to reinforce the mechanical cohesion of the structural elements to a satisfactory degree.Differentiation in the evolution of the mechanical strength values of the specimens was observed depending on the type of inert they contained. Specifically, the average strength value of the structural elements containing diabase inert materials at 90 days of curing was calculated at 2.53 MPa, while the corresponding value for those containing limestone inert materials was 2.28 MPa. This differentiation was related to the geometric and physico-mechanical properties of the inert materials examined in this dissertation.

Available Files

Services

Statistics