| | 1-51 από 51 Αποτελέσματα - Αντωνιαδης Αριστομενης | |
|---|
|
| 1 | A. Marinakis, E. Dandouti, and A. Antoniadis, “CAD-based simulation model for the calculation of chip geometry and cutting force components in gear shaping,” J. Manuf. Sci. Eng., vol. 144, no. 8, Aug. 2022, doi: 10.1115/1.4053809. | 2024-04-18 |
| 2 | A. Marinakis, P. Alevras, and A. Antoniadis, “A systematic analysis of the power skiving process using a novel gear manufacturing simulation software,” Simul. Modell. Pract. Theory, vol. 123, Feb. 2023, doi: 10.1016/j.simpat.2022.102711. | 2023-12-21 |
| 3 | A. Marinakis, A. Katsamaki, I. Pateraki, E. Nikolidakis and A. Antoniadis, "A novel serious game for education and training of Computer-Aided Manufacturing (CAM) programming," presented at the 2021 30th Annual Conference of the European Association for Education in Electrical and Information Engineering (EAEEIE), Prague, Czech Republic, 2021, doi: 10.1109/EAEEIE50507.2021.9530968. | 2023-05-22 |
| 4 | G. Daskalogrigorakis, S. Kirakosian, A. Marinakis, V. Nikolidakis, I. Pateraki, A. Antoniadis and K. Mania, "G-Code Machina: a serious game for G-code and CNC machine operation training," in 2021 IEEE Global Engineering Education Conference (EDUCON), Vienna, Austria, 2021, pp. 1434-1442, doi: 10.1109/EDUCON46332.2021.9453982. | 2023-05-10 |
| 5 | A. Marinakis, K. Mania and A. Antoniadis, “Augmented reality for CAD-CAM training featuring 3D interactive geometric transformations,” Comput. Aided Des. Appl., vol. 18, no. 3, pp. 561-570, 2021, doi: 10.14733/cadaps.2021.561-570. | 2023-05-05 |
| 6 | E. Nikolidakis, and A. Antoniadis, “FEM modeling and simulation of kerf formation in the nanosecond pulsed laser engraving process,” CIRP J. Manuf. Sci. Technol., vol. 35, pp. 236-249, Nov. 2021, doi: 10.1016/j.cirpj.2021.06.014. | 2022-09-26 |
| 7 | M.T. Mansour, K. Tsongas, D. Tzetzis and A. Antoniadis, "The in-plane compression performance of hierarchical honeycomb additive manufactured structures" in 23rd Innovative Manufacturing Engineering and Energy International Conference, 2019. doi: 10.1088/1757-899X/564/1/012015 | 2020-04-09 |
| 8 | M.C. Vlachou, C. Efstathiou, A. Antoniadis and T.D. Karapantsios, "Micro-grooved surfaces to enhance flow boiling in a macro-channel," Exp. Therm. Fluid Sci., vol. 108, pp. 61-74, Nov. 2019. doi: 10.1016/j.expthermflusci.2019.05.015 | 2020-04-07 |
| 9 | E. Nikolidakis and A. Antoniadis, "FEM modeling simulation of laser engraving," Int. J. Adv. Manuf. Technol., vol. 105, no. 7-8, pp. 3489-3498, Dec. 2019. doi: 10.1007/s00170-019-04603-3 | 2020-04-02 |
| 10 | M. Mansour, K. Tsongas, D. Tzetzis and A. Antoniadis "Mechanical and dynamic behavior of fused filament fabrication 3D printed polyethylene terephthalate glycol reinforced with carbon fibers," Polym. Plast. Technol. Eng., vol. 57, no. 16, pp. 1715-1725, Nov. 2018. doi: 10.1080/03602559.2017.1419490 | 2019-05-27 |
| 11 | N. Bilalis, A. Antoniadis, A. Dalivigas and H. Athanasaki-Michailidou, “A methodology for evaluating software tools for the development of e-learning systems,” presented at 10th International Conference on Environmental Ergonomics, Fukuoka, Japan, 2002. | 2015-11-15 |
| 12 | D. Vakondios, P. Kyratsis, A. Lyronis and A. Antoniadis, "Surface topomorphy and roughness prediction in micro-ball-end milling using a CAD-based simulation," Int. J. Mach. Mach. Mater., vol. 19, no. 4, pp. 313-324, 2017. doi: 10.1504/IJMMM.2017.086162 | 2018-06-21 |
| 13 | K.-D. Bouzakis and A. Antoniadis, "Optimal selection of machining data in gear hobbing regarding the tool mechanical stresses occuring during the cutting process", CIRP Annals, vol. 37, no. 1, pp. 109-112, 1988. doi:10.1016/S0007-8506(07)61597-2 | 2015-10-22 |
| 14 | A. Antoniadis, "Simulation of milled surface topomorphy", Int. J. Modelling and Simulation, vol. 21, no. 4, pp. 271-274, 2001. doi:10.1080/02286203.2001.11442212 | 2015-10-22 |
| 15 | K.-D. Bouzakis, S. Kombogiannis, A. Antoniadis and N. Vidakis, "Gear hobbing cutting process simulation and tool wear prediction models", J. Manuf. Sci. Eng., vol. 124, no. 1, pp. 42-51, Mar. 2001. doi:10.1115/1.1430236 | 2015-10-22 |
| 16 | A. Antoniadis, N. Vidakis and N. Bilalis, "Fatigue fracture investigation of cemented carbide tools in gear hobbing, part 1: FEM modeling of fly hobbing and computational interpretation of experimental results", J. Manuf. Sci. Eng., vol. 124, no. 4, pp. 784-791, Oct. 2002. doi:10.1115/1.1511172 | 2015-10-22 |
| 17 | A. Antoniadis, N. Vidakis and N. Bilalis, "Fatigue fracture investigation of cemented carbide tools in gear hobbing, part 2: the effect of cutting parameters on the level of tool stresses – a quantitative parametric analysis", J. Manuf. Sci. Eng., vol. 124, no. 4, pp. 792-798, Oct. 2002. doi:10.1115/1.1511173 | 2015-10-22 |
| 18 | N. Bilalis, G. Scroubelos, A. Antoniadis, D. Emiris and D. Koulouriotis, "Visual factory: basic principles and the 'zoning' approach", Int. J. Prod. Research, vol. 40, no. 15, pp. 3575-3588, 2002. doi:10.1080/00207540210140031 | 2015-10-22 |
| 19 | A. Antoniadis , C. Savakis, N. Bilalis and A. Balouktsis, "Prediction of surface topomorphy and roughness in ball-end milling", Int. J. Advanced Manufacturing Technology, vol. 21, no. 12 , pp. 965-971, Sep. 2003. doi:10.1007/s00170-002-1418-8 | 2015-10-22 |
| 20 | A. Antoniadis, N. Vidakis and N. Bilalis, "A simulation model of gear skiving", J. Materials Process. Technology, vol. 146, no. 2, pp. 213-220, Feb. 2004. doi:10.1016/j.jmatprotec.2003.10.019 | 2015-10-23 |
| 21 | G. P. Petropoulos, N. M. Vaxevanidis, C. N. Pandazaras, and A. Antoniadis, "Control of representative turned surface textures", Wear, vol. 257, no. 12, pp. 1270-1274, Dec. 2004. doi:10.1016/j.wear.2004.04.004 | 2015-10-23 |
| 22 | E. Maravelakis, N. Bilalis, A. Antoniadis, K. A. Jones and V. Moustakis, "Measuring and benchmarking the innovativeness of SMEs: a three-dimensional fuzzy logic approach", Prod. Planning and Control, vol. 17, no. 3, pp. 283-292, 2006. doi:10.1080/09537280500285532 | 2015-10-23 |
| 23 | G. P. Petropoulos, N. M. Vaxevanidis, C. N. Pandazaras and A. Antoniadis, "Multi-parameter identification and control of turned surface textures", Int. J. Adv. Manuf. Technol., vol. 29, no. 1, pp. 118-128, May 2006. doi:10.1007/s00170-004-2483-y
| 2015-10-23 |
| 24 | A. Balouktsis, T. D. Karapantsios, K. Anastasiou, A. Antoniadis and I. Balouktsis, "Load matching in a direct-coupled photovoltaic system-application to Thevenin's equivalent loads", Int. J. Photoenergy, pp. 1-7, 2006. doi:10.1155/IJP/2006/27274 | 2015-10-23 |
| 25 | A. Balouktsis, T. D. Karapantsios, A. Antoniadis, D. Paschaloudis, A. Bezergiannidou and N. Bilalis, "Sizing stand-alone photovoltaic systems", Int. J. Photoenergy, pp. 1-8, 2006. doi:http://dx.doi.org/10.1155/IJP/2006/73650 | 2015-10-23 |
| 26 | K. Maniadaki, T. Kestis, N. Bilalis and A. Antoniadis, "A finite element-based model for pure waterjet process simulation", Int. J. Advanced Manufacturing Technology, vol. 31, no. 9, pp. 933-940, Jan. 2007. doi:10.1007/s00170-005-0274-8 | 2015-10-23 |
| 27 | N. Bilalis, L. V. Wassenhove, E. Maravelakis, A. Enders, V. Moustakis and A. Antoniadis, "An analysis of European textile sector competitiveness", Measuring Bus. Excellence J. , vol. 10, no. 1, pp. 27-35, 2006. doi:http://dx.doi.org/10.1108/13683040610652195 | 2015-10-23 |
| 28 | E. Maravelakis, K. David, A. Antoniadis, A. Manios, N. Bilalis and Y. Papaharilaou, "Reverse engineering techniques for cranioplasty: a case study" J. Medical Eng. and Technology, vol. 32, no. 2, pp. 115-121, 2008. doi:10.1080/03091900600700749 | 2015-10-23 |
| 29 | V. Dimitriou, N. Vidakis and A. Antoniadis, "Advanced computer aided design simulation of gear hobbing by means of three-dimensional kinematics modeling", J. Manuf. Sci. Eng., vol. 129, no. 5, pp. 911-918, Nov. 2006. doi:10.1115/1.2738947 | 2015-10-23 |
| 30 | N. Bilalis, M. Petousis and A. Antoniadis, "Model for surface-roughness parameters determination in a virtual machine shop environment", Int. J. Advanced Manufacturing Technology, vol. 40, no. 11, pp. 1137-1147, Feb. 2009. doi:10.1007/s00170-008-1441-5 | 2015-10-23 |
| 31 | V. Dimitriou and A. Antoniadis, "CAD-based simulation of the hobbing process for the manufacturing of spur and helical gears", Int. J. Advanced Manufacturing Technology, vol. 41, no. 3, pp. 347-357, Mar. 2009. doi:10.1007/s00170-008-1465-x | 2015-10-23 |
| 32 | K. Maniadaki, A. Antoniadis and N. Bilalis, "Effect of impact angle and velocity in crater circularity in abrasive water jet machining by means of multi-particle impact simulation", Int. J. of Machining and Machinability of Materials, vol. 10, no. 1-2, pp. 34-47, 2001. doi:10.1504/IJMMM.2011.040853 | 2015-10-23 |
| 33 | P. Kyratsis, N. Tapoglou, N. Bilalis and A. Antoniadis, "Thrust force prediction of twist drill tools using a 3D CAD system application programming interface", Int. J. of Machining and Machinability of Materials, vol. 10, no. 1-2, pp. 18-33, 2011. doi:10.1504/IJMMM.2011.040852 | 2015-10-23 |
| 34 | M. J. Papagrigorakis, Ph. N. Synodinos, A. Antoniadis, E. Maravelakis, P. Toulas, O. Nilsson and E. Baziotopoulou-Valavani, "Facial reconstruction of an 11-year-old female resident of 430 B.C. Athens", Angle Orthod., vol. 81, no. 1, pp. 169-177, Jan. 2011. doi:10.2319/012710-58.1 | 2015-10-23 |
| 35 | P. Kyratsis, N. Bilalis and A. Antoniadis, "CAD-based simulations and design of experiments for determining thrust force in drilling operations", Comput. Aided Design, vol. 43, no. 12, pp. 1879-1890, Dec. 2011. doi:10.1016/j.cad.2011.06.002 | 2015-10-23 |
| 36 | N. Tapoglou and A. Antoniadis, "CAD-based calculation of cutting force components in gear hobbing", J. Manuf. Sci. Eng., vol. 134, no. 3, May 2012. doi:10.1115/1.4006553 | 2015-10-24 |
| 37 | N. Tapoglou and A. Antoniadis, "3-Dimensional kinematics simulation of face milling", Measurement, vol. 45, no. 6, pp. 1396-1405, Jul. 2012. doi:10.1016/j.measurement.2012.03.026 | 2015-10-24 |
| 38 | A. Antoniadis, "Gear skiving-CAD simulation approach", Comput. Aided Design, vol. 44, no. 7, pp. 611-616, Jul. 2012. doi:10.1016/j.cad.2012.02.003 | 2015-10-24 |
| 39 | D. Vakondios, P. Kyratsis, S. Yaldiz and A. Antoniadis, "Influence of milling strategy on the surface roughness in ball end milling of the aluminum alloy Al7075-T6", Measurement, vol. 45, no. 6, pp. 1480-1488, Jul. 2012. doi:10.1016/j.measurement.2012.03.001 | 2015-10-24 |
| 40 | N. Vidakis, A. Antoniadis and N. Bilalis, "The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds", J. Materials Process. Technology, vol. 143-144, pp. 481-485, Dec. 2003. doi:10.1016/S0924-0136(03)00300-5 | 2015-10-22 |
| 41 | N. Bilalis, E. Maravelakis, A. Antoniadis and V. Moustakis, "Mapping product innovation profile to product development activities - the I‐DSM tool" in IEEE International Engineering Management Conference, 2004, pp. 1018-1022, doi: 10.1109/IEMC.2004.1408845 | 2015-11-05 |
| 42 | N. Bilalis, G. Katsigiannis, P. Georgilakis, A.T. Souflaris and A. Antoniadis, “Automating the product design cycle for custom made products”, in International Design Conference, Dubrovnik, pp. 129-134, May 2004. | 2015-10-20 |
| 43 | A. Antoniadis, K. Savakis, N. Bilalis and A. Balouktsis, “Optimal selection of cutting
strategy in ball end milling regarding the surface quality,” presented at Advanced Manufacturing Systems and Technology AMST’02, Udine, Italy, 2002. | 2015-11-15 |
| 44 | N. Bilalis, K. A. Jones, C. Hall, A. Antoniadis and M. Maravelakis, “Profiling product’s
innovation in new product devlopment,” presented at Engineering Systems Design and Analysis, Instabul, Turkey, 2002. | 2015-11-15 |
| 45 | N. Bilalis, D. Lolos, A. Antoniadis and D. Emiris, "A fuzzy sets approach to new product portfolio management," in IEEE International Engineering Management Conference, 2002. doi: 10.1109/IEMC.2002.1038480 | 2015-11-15 |
| 46 | A. Antoniadis, N. Bilalis, C. Savakis, E. Maravelakis and G. Petropoulos, "Influence of machining inclination angle on surface quality in ball end milling" presented at International Conference on Advances in Materials and Processing Technologies, Dublin, Ireland, 2003. | 2015-11-15 |
| 47 | E. Maravelakis, N. Bilalis, K.-A. Jones and A. Antoniadis, "Establishing a practical company innovative benchmark," presented at 12th International Conference on Management of Technology, 2003. | 2015-11-15 |
| 48 | N. Bilalis, M. Petousis, A. Antoniadis, "Industrial applications’ simulation technologies in virtual environments Part 1: virtual prototyping," presented at New Horizons in Industry and Education, 2003. | 2015-11-15 |
| 49 | N. Bilalis, M. Petousis and A. Antoniadis, “Industrial applications simulation technologies in virtual environments virtual manufacturing and virtual assembly,” presented at New Horizons in Industry and Education, Santorini, Greece, 2003. | 2015-11-15 |
| 50 | A. Antoniadis, N. Vidakis and N. Bilalis, “Gear Skiving Simulation,” presented at 8th Cairo University International Conference On Mechanical Design And Production, 2004. | 2015-11-15 |
| 51 | E. Maravelakis, N. Bilalis, A. Antoniadis and V. Moustakis, "A novel approach to product innovation profiling assessment. The I-DSM tool," in 7th Biennial ASME Conference on Engineering Systems Design and Analysis, July 2004. | 2015-11-15 |
| [ Εμφάνιση ανά Σελίδα ] |
