Institutional Repository
Technical University of Crete
Technical University of Crete
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/340FFF4A-549C-49DA-ACD3-3C966000F6D1 | - |
| Identifier | http://www.sciencedirect.com/science/article/pii/S0010448512000395 | - |
| Identifier | https://doi.org/10.1016/j.cad.2012.02.003 | - |
| Language | en | - |
| Extent | 6 pages | en |
| Title | Gear skiving – CAD simulation approach | en |
| Creator | Antoniadis Aristomenis | en |
| Creator | Αντωνιαδης Αριστομενης | el |
| Publisher | Elsevier | en |
| Content Summary | Gear skiving is used as a gear finishing process to reduce distortion errors which occurred on the gears due to the heat treatment. This process is similar to gear hobbing but the difference is that the cutting tool has a negative rake angle and tooth rake offset. The present study simulates the kinematics of the cutting process with the aid of commercial CAD software and allows the precise determination of the non-deformed chips and the developing cutting forces. The simulation model is verified based on the theoretical shape of the produced gear gap and the comparison between measured and calculated cutting forces. | en |
| Type of Item | Peer-Reviewed Journal Publication | en |
| Type of Item | Δημοσίευση σε Περιοδικό με Κριτές | el |
| License | http://creativecommons.org/licenses/by/4.0/ | en |
| Date of Item | 2015-10-24 | - |
| Date of Publication | 2012 | - |
| Subject | Gear skiving | en |
| Subject | CAD-based simulation | en |
| Subject | Cutting forces | en |
| Bibliographic Citation | A. Antoniadis, "Gear skiving-CAD simulation approach", Comput. Aided Design, vol. 44, no. 7, pp. 611-616, Jul. 2012. doi:10.1016/j.cad.2012.02.003 | en |
Copyright © DIAS 2013
