Ιδρυματικό Αποθετήριο
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

Chemical characterization of Cretan clays for the design of restoration mortars

Maravelaki Pagona, Budak, B. M, Kallithrakas-Kontos Nikolaos

Πλήρης Εγγραφή


URI: http://purl.tuc.gr/dl/dias/2FAF536D-2589-45E4-B36A-EDE5B3891715
Έτος 2008
Τύπος Δημοσίευση σε Περιοδικό με Κριτές
Άδεια Χρήσης
Λεπτομέρειες
Βιβλιογραφική Αναφορά M. Budak, P. Maravelaki-Kalaitzaki and N. Kallithrakas-Kontos, "Chemical characterization of Cretan clays for the design of restoration mortars," Microchim. Acta, vol. 162, no. 3, pp. 325-331, Aug. 2008. doi: 10.1007/s00604-007-0927-4 https://doi.org/10.1007/s00604-007-0927-4
Εμφανίζεται στις Συλλογές

Περίληψη

Three clays and a marly-limestone from the West of Chania, Crete, fired at temperatures ranging from 200 to 1200 °C, were characterized by XRD, FTIR, EDXRF and wet chemical analyses. The aim of this study was to assess the pozzolanic and hydraulic properties of these materials for potential use as binders in the design of restoration mortars. The mineralogical composition of the clays is quartz, illite, calcite, plagioclase, kaolinite and hematite. The identification of larnite and gehlenite in the calcined marly-limestone established it as potential cementious binder. Among the clays, one with low amount of calcite and considerable kaolinite content exhibited the best pozzolanic activity upon heating at 600 °C. Therefore, it can be considered as an appropriate material for restoration purposes. It is deduced that the pozzolanic activity of fired clays is greatly dependent on the firing temperature and is enhanced in clays containing low calcite and high kaolinite amounts.

Υπηρεσίες

Στατιστικά