Institutional Repository
Technical University of Crete
Technical University of Crete
EN
|
EL
| URI: | http://purl.tuc.gr/dl/dias/484286E2-20BF-4E1A-8D79-827DB0FCB821 | ||
| Year | 2016 | ||
| Type of Item | Peer-Reviewed Journal Publication | ||
| License |
|
||
| Bibliographic Citation | C. E. Chalioris, C. G. Karayannis, G. M. Angeli, N. A. Papadopoulos, M. J. Favvata and C. P. Providakis, "Applications of smart piezoelectric materials in a wireless admittance monitoring system (WiAMS) to structures-tests in RC elements," Case Stud. Constr. Mater., vol. 5, pp. 1-18, Dec. 2016. doi: 10.1016/j.cscm.2016.03.003 https://doi.org/10.1016/j.cscm.2016.03.003 | ||
| Appears in Collections |
The application of an innovative real-time structural health monitoring system is studied through tests performed on flexural and shear-critical reinforced concrete elements subjected to monotonic and cyclic loading. The test set-up involves a Wireless impedance/Admittance Monitoring System (WiAMS) that comprises specially manufactured small-sized portable devices to collect the voltage frequency responses of an array of smart piezoelectric transducers mounted on structural members of reinforced concrete constructions. Damage detection and evaluation is achieved using the in-situ measurements of the integrated piezoelectric sensors/actuators signals at the healthy state of the member and at various levels of damage during testing. Three different installations of Piezoelectric lead Zirconate Titanate (PZT) transducers are examined: (a) epoxy bonded PZTs on the surface of the steel reinforcing bars of the flexural elements, (b) PZTs embedded inside the concrete mass of the shear-critical beams and (c) externally epoxy bonded PZTs attached to the concrete surface of the tested elements. The smart piezoelectric materials have been pre-installed before testing based on the potential flexural and shear cracking of the elements. Quantitative assessment of the examined damage levels using values for the statistical damage index is also presented and discussed. Voltage signals and index values acquired from the PZTs' measurements using the proposed wireless monitoring technique demonstrated obvious discrepancies between the frequency response of the healthy and the examined damage levels for every tested element. These differences clearly indicate the presence of damage, whereas their gradation reveals the magnitude of the occurred damage. Promising results concerning the prediction of the forthcoming fatal failures at early damage stages have also been derived.
Copyright © DIAS 2013
